How To Hang Curtain Rods


How to hang curtain rods – To hang the curtain rods more you will need a pencil, a tape measure, a hammer, a drill, a screwdriver, and a level. Having an extra pair of hands really helps too. You can follow the instructions that come with your curtain rod or just follow the guidelines. Remember how you measured the stick to buy? You decide how much of each side of the window you want your curtains to hang. For most windows, you will want the curtain to begin about 1 ½ inches above the window trim.

Now look at your curtain rods. For 3-5 “hidden window standard size bar (whatever you decide) and ascended from top 1 ½”. Mark this point on each side of the window and make sure it is level even, straight whatever you call it. How to Hang Curtain Rods? It is very important! Now just follow the instructions that come with your curtain rod to hang certain types of hardware. To open the curtain rods, decorative bars such as popular today. You will want to determine where to hang the brackets. Follow the instructions above so that the rod is hidden, unless you hang the bracket mark the location that may be a different distance from the window.

How to hang curtain rods? Here’s some information that’s really useful: find out where the “crippled studs” are. They’re wooden nails to the right of your window. Find out how far they extend through the window and you will have an easy time breeze hang your stick. You don’t need an anchor or insults or many beers later. How do you do it? You have to have a beam finder. You really just need a cheaper one if you just depend on the stalk wall hangings and curtains from time to time. Follow the instructions to find your posts and then mark your points. If you are not going to mess with a beam finder, please be sure to include your rod is very close to the window molding-you will probably find the males not.


Comments are closed.